DON’T MISS LIMITED-TIME MEMORIAL DAY DEALS. SHOP NOW >

  • 7184558442
  • Sales@ufiredoor.com
Facebook-f Google-plus-g Instagram Youtube

Knocked Down Hollow Metal Masonry Frame

Made in USA

Name or Company Name*
Door Handling
Max. file size: 32 MB.

OVERVIEW

A KD or Knocked Down Hollow Metal Masonry Frame can be used for exterior or interior applications and comes in 3 pieces (strike jamb, hinge jamb and head). The KD masonry frame can be installed before or after the wall has been built. Can be used with exterior wood stud walls as well (butts existing wall).

  • 16-Gauge Steel – Fire-Rated up to 3 Hours
  • Wall Anchors for Masonry and Wood Stud Walls (New & Existing)
  • Standard Jamb Depths: 4-3/4″ to 8-3/4″

More About

Knocked Down Hollow Metal Masonry Frame

Universal Fireproof Doors provides thousands of fire-rated Residential door and metal apartment door, also exterior doors for apartment building all over the five boroughs and much more, including 20-minute fire-rated metal doors and up to 90-minute. Wooden doors have a timeless appearance, but they need to be cleaned on a daily basis to keep them looking modern. Steel apartment doors are more durable and energy- efficient, but their design options are minimal. Fiberglass doors blend the flexibility of wood doors with the durability of a metal apartment door. Universal Fireproof Doors manufacture meaning we design anything you desire.Fill out the form below to get get immediate quote or call (516)774-2651 to schedule a FREE estimate

Specifications

Construction Heavy Duty; 16-Gauge Cold Rolled Steel – meets the requirements of ANSI A250.8-2014 (SDI 100) Handing Handed – LH/RHR, RH/LHR
Jamb Faces 2-inch Jamb and Head Faces Standard (4″ Heads and Custom Jamb Faces Available) Parts 2 Jambs, 1 Head
Stop Height 5/8” Stop Height Rabbets Unequal Double Rabbets Standard
Corners Exact Fit Die-Mitered Corner Connections Hinge Reinforcements 7-Gauge Hinge Reinforcements
Closer Reinforcement Optional 14-Gauge Door Closer Reinforcement Strike Prep 4-7/8” Universal ASA Strike Preparation (Blank Strike Jambs Available)
Silencer Preparation 9/32” Silencer Preparation Pair Head Preps Flush Bolt Strike, Silencer Preps, SVR Preps
Optional Preps Blank Hinge Jamb For Continuous Hinge, Deadbolt Strike, Electric Strike, Exit Device Strike Reinforcement Existing Wall Anchors EWA-Existing Wall Butterfly Anchor Standard (Loose), Existing Wall Tube Anchor (Welded-in), Reversed Base Anchor
New Wall Anchors T Anchor, Wire Anchor, Floor Base Anchor (Loose or Welded-in) Fire-Rating Optional – WHI / ITS up to 3-Hour Fire-Rating (Mylar Label) – Fire-Rated Assemblies must be in accordance with NFPA 80
Finish Factory-Applied, Baked-On, Rust Inhibiting Primer (No Special Color Options) – Not intended to be a finish coat. It is recommended that finish paint (top coat) be applied after installation Buy American Act Compliance Meets Buy American Act – Made in USA
Mfg. Hinge/Lock Locations Steelcraft Locations Standard (Ceco, Curries, and Custom Locations Available)

Standard Jamb Depths

4-3/4″ Jamb Depth

(3-3/4″ Throat)

5-3/4″ Jamb Depth

(4-7/8″ Throat)

6-3/4″ Jamb Depth

(5-3/4″ Throat)

7-3/4″ Jamb Depth

(6-3/4″ Throat)

8-1/4″ Jamb Depth

(7-1/4″ Throat)

8-3/4″ Jamb Depth

(7-3/4″ Throat)
6-1/4″ and 7-1/8″ jamb depths also standard (not pictured here)

Anchors for New Walls

T Anchor

Floor Base Anchor

Anchors for Existing Walls

EWA – Existing Wall Butterfly Anchor ¹

EWA – Existing Wall Tube Anchor ²

Reversed Base Anchor ³

1. Standard. Can be used with existing block wall or exterior wood stud walls (frame butts wall). Frame is punch and dimpled (4 dimpled holes per jamb = 8 per frame). Furnished with flat head (8) 3/8″ x 6″ masonry sleeve anchors or flat head (8) 3/8″ x 5″ wood lag screws. Butterfly anchors snap-in – ship loose standard. Can be welded-in for an additional charge.
2. Non-standard – available upon request at an additional charge. Welded-in tube anchor. Can be used with existing block wall or exterior wood stud walls (frame butts wall). Frame is punch and dimpled (4 dimpled holes per jamb = 8 per frame). Furnished with flat head (8) 3/8″ x 6″ masonry sleeve anchors or flat head (8) 3/8″ x 5″ wood lag screws.
3. Non-standard – available upon request at an additional charge. Welded-in reverse base anchor (install threshold to cover anchor).

Punch and Dimpled Frame Detail

Anchor Detail

Reviews

There are no reviews yet.

Be the first to review “Knocked Down Hollow Metal Masonry Frame”

Your email address will not be published.

Service Quality

Experience Company

100 years of experience in door manufacturing

Quality Oriented

Guaranteed quality and safe product

Online Suport

24 hour online service

Related Doors

Related products

  • 1171 Myrtle Ave Brooklyn, NY 11206
  • 75 Emjay BlvdBrentwood, NY 11717
  • Mon - Fri: 8am-4:30pm
    Sat: 8am-2:00pm

Shop

Quick Links

Get in Touch

Facebook-f Google-plus-g Instagram Youtube
Copyright © 2022,All Rights Reserved. Developed by DOT